收藏本站
500MHz to 1100MHz Adjustable
RF Predistorter
Phase Expansion Circuitry
Figure 1 shows a typical PA ’ s phase behavior with
respect to input power. For input powers less than the
breakpoint level, the phase remains relatively constant.
As the input power becomes greater than the break-
point level, the phase begins to compress and deterio-
rate the power amplifier ’ s linearity. To compensate for
this AM-PM distortion, the MAX2010 provides phase
expansion, which occurs at the same breakpoint level
but with the opposite slope. The overall result is a flat
phase response.
Phase Expansion Breakpoint
The phase expansion breakpoint is typically controlled
by a digital-to-analog converter (DAC) connected
through the PBIN pin. The PBIN input voltage range of
0V to V CC corresponds to a breakpoint input power
range of 0.7dBm to 23dBm. To achieve optimal perfor-
mance, the phase expansion breakpoint of the
MAX2010 must be set to equal the phase compression
breakpoint of the PA.
Phase Expansion Slope
The phase expansion slope of the MAX2010 must also
be adjusted to equal the opposite slope of the PA ’ s
phase compression curve. The phase expansion slope
of the MAX2010 is controlled by the PFS1, PFS2, PDCS1,
and PDCS2 pins. With pins PFS1 and PFS2 AC-coupled
and connected to a variable capacitor or varactor diode,
the PFS1 and PFS2 pins perform the task of fine tuning
the phase expansion slope. Since off-chip varactor
diodes are recommended for this function, they must
be closely matched and identically biased. A minimum
effective capacitance of 2pF to 6pF is required
to achieve the full phase slope range as specified in
the Electrical Characteristics tables.
As shown in Figure 2, the varactors connected to PFS1
and PFS2 are in series with three internal capacitors on
each pin. By connecting and disconnecting these inter-
nal capacitors, a larger change in phase expansion
slope can be achieved through the logic levels present-
ed at the PDCS1 and PDCS2 pins. The phase expan-
sion slope is at its maximum when both V PDCS1 and
V PDCS2 equal 0V. The phase tuning has a minimal
effect on the small-signal gain.
Gain Expansion Circuitry
In addition to phase compression, the PA also suffers
from gain compression (AM-AM) distortion, as shown in
Figure 3. The PA gain curve remains flat for input pow-
ers below the breakpoint level, and begins to compress
at a given rate (slope) for input powers greater than the
breakpoint level. To compensate for such gain com-
pression, the MAX2010 generates a gain expansion,
which occurs at the same breakpoint level with the
opposite slope. The overall result is a flat gain response
at the PA output.
PA PHASE
COMPRESSION
BREAKPOINT
SLOPE
P IN (dBm)
MAX2010
PHASE EXPANSION
P IN (dBm)
IMPROVED
PHASE DISTORTION
P IN (dBm)
Figure 1. PA Phase Compression Canceled by MAX2010 Phase Expansion
______________________________________________________________________________________
13
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
MAX2014ETA+T IC DETECT/CNTRL LOG 8-TDFN
MAX2015EUA+T IC DETECT/CNTRL LOG 8-UMAX
MAX2015EVKIT EVAL KIT FOR MAX2015
MAX2016ETI+T IC DETECT/CNTRL LOG 28-TQFN
MAX2021ETX+T IC MOD/DEMOD 36-TQFN
MAX2022ETX+T IC MOD 1500MHZ TO 2500MHZ 36TQFN
MAX2022EVKIT EVAL KIT FOR MAX2022
MAX2023ETX+T IC MOD/DEMOD HI DYN RNG 36-TQFN
相关代理商/技术参数
MAX2010ETI+TGH7 功能描述:射频前端 500Mhz to 1100Mhz Adjustable RF Predistorter RoHS:否 制造商:Skyworks Solutions, Inc. 类型: 工作频率:2.4 GHz, 5 GHz 最大数据速率:54 Mbps 噪声系数: 工作电源电压:3.3 V 电源电流:180 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-32
MAX2010ETI-T 功能描述:射频前端 0.5-1.1GHz Adj RF Predistorter RoHS:否 制造商:Skyworks Solutions, Inc. 类型: 工作频率:2.4 GHz, 5 GHz 最大数据速率:54 Mbps 噪声系数: 工作电源电压:3.3 V 电源电流:180 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-32
MAX2010EVKIT 功能描述:射频前端 Evaluation Kit for the MAX2009 MAX2010 RoHS:否 制造商:Skyworks Solutions, Inc. 类型: 工作频率:2.4 GHz, 5 GHz 最大数据速率:54 Mbps 噪声系数: 工作电源电压:3.3 V 电源电流:180 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-32
MAX20-11.0C 制造商:MDE 制造商全称:MDE Semiconductor, Inc. 功能描述:HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR (TVS) DIODE
MAX20-11.0CA 制造商:MDE 制造商全称:MDE Semiconductor, Inc. 功能描述:HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR (TVS) DIODE
MAX20-12.0C 制造商:MDE 制造商全称:MDE Semiconductor, Inc. 功能描述:HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR (TVS) DIODE
MAX20-12.0CA 制造商:MDE 制造商全称:MDE Semiconductor, Inc. 功能描述:HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR (TVS) DIODE
MAX20-13.0C 制造商:MDE 制造商全称:MDE Semiconductor, Inc. 功能描述:HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR (TVS) DIODE